Self aligning welding rotator
— —
Navigation
Send Us A Message
Self aligning welding rotator
Welding rotator is consist of rotator with motor ,rotator without motor and control system.Welding rotator is mainly used for making cylinder work piece rotating.Automatic welding rotator Then its better for welding of work piece.Welding turning roll also used for big diameter pipe butt welding and pressure vessel.Welding rotator improves the productivity and quality of welding,also Pipe welding rotator reduce labor of worker.Pipe rotator has become necessary equipment in welding cylinder work piece
Product Parameters
1.Introduction for Self aligning welding rotator:
Welding rotator is consist of rotator with motor ,rotator without motor and control system.Welding rotator is mainly used for making cylinder work piece rotating.Automatic welding rotator Then its better for welding of work piece.Welding turning roll also used for big diameter pipe butt welding and pressure vessel.Welding rotator improves the productivity and quality of welding,also Pipe welding rotator reduce labor of worker.Pipe rotator has become necessary equipment in welding cylinder work piece
2.Technical parameter for Self aligning welding rotator
3.Characters for Self aligning welding rotator:
3.1. Welding rotator consist of One drive unit and One idler unit.
3.2. Automatic welding rotator Remote hand control box with functions, FWD turning,REV turning,Speed setting.
3.3. Pipe Welding rotator rotating speed is 100~1000 mm/min through VFD control
3.4. Pipe rotator with CE certificates supported to European market.
3.5. Welding turning roll Original manufacturer ensure the quality , better prices and service.
3.6. Welding column boom manipulator,fit up welding rotator etc. are all available.
Related products
![Welding manipulator]( "Welding manipulator")
Welding manipulator1.1. Welding manipulator With 1000-7000mm effective lifting stroke and retracting stroke.
1.2. Welding column boom machine Boom end capacity up to 300kg. With 100x100mm cross slides.
1.3. Pipe welding manipulator Automatic welding for tank/pipe/vessel straight seam and circle seam.![Self aligning welding rotator]( "Self aligning welding rotator")
Self aligning welding rotatorWelding rotator is consist of rotator with motor ,rotator without motor and control system.Welding rotator is mainly used for making cylinder work piece rotating.Automatic welding rotator Then its better for welding of work piece.Welding turning roll also used for big diameter pipe butt welding and pressure vessel.Welding rotator improves the productivity and quality of welding,also Pipe welding rotator reduce labor of worker.Pipe rotator has become necessary equipment in welding cylinder work piece![Bolt adjusting welding rotator]( "Bolt adjusting welding rotator")
Bolt adjusting welding rotatorWelding rotator is consist of rotator with motor ,rotator without motor and control system.Welding rotator is mainly used for making cylinder work piece rotating.Automatic welding rotator Then its better for welding of work piece.Welding turning roll also used for big diameter pipe butt welding and pressure vessel.Welding rotator improves the productivity and quality of welding,also Pipe welding rotator reduce labor of worker.Pipe rotator has become necessary equipment in welding cylinder work piece![Lead screw welding rotator]( "Lead screw welding rotator")
Lead screw welding rotatorWelding rotator is consist of rotator with motor ,rotator without motor and control system.Welding rotator is mainly used for making cylinder work piece rotating.Automatic welding rotator Then its better for welding of work piece.Welding turning roll also used for big diameter pipe butt welding and pressure vessel.Welding rotator improves the productivity and quality of welding,also Pipe welding rotator reduce labor of worker.Pipe rotator has become necessary equipment in welding cylinder work piece![Welding positioner]( "Welding positioner")
Welding positioner1.1.Welding rotary table Capacity from100kg,300kg,600kg,1000kg,2000kg,3000kg,5000kg,8000kg,10000kg,20000kg are all available.
1.2.Welding Positioner can tilting from 0 to 90° ~120°, rotating 360° by VFD control.
1.3.Automatic welding positioner Voltage standard is 380V , 50HZ , 3PH. Other voltage can be customized![Space frame welding machine]( "Space frame welding machine")
Space frame welding machineBody of space frame welding machine is assembled by steel metal,structure parts are anneal processed,quite stable and durable;Automatic space frame truss welding machine realizes welding gun swing welding,welding gun is adjusted by manual;Main and vice withstanding device is by hydraulic,Space frame welding machine will loose after welding finishes,lifting of work piece adopts lead screw by manual.Automatic space frame welding machine Length of body is 7.2 meters,and width is 900mm,max welding gap could be 3-5cm,length of work piece should be under 5.5 meters,and diameter of work piece is 42mm-180mm![12 meter Pipe inside and outside seam welding machine]( "12 meter Pipe inside and outside seam welding machine")
12 meter Pipe inside and outside seam welding machine12 meter pipe welding machine is customized according to client’s request,long beam is clamped on the frame,inside seam welding is welded through moving of welding rotator on the trolley.12 meter pipe longitudinal seam welding machine Moving of trolley is controlled by VFD,stable and reliable,and speed is adjustable,12 meter pipe inside longitudinal seam welding machine meet with different welding technology.Since diameter of pipe is small,worker can not get inside for checking and adjusting,12 meter pipe outside longitudinal seam welding machinewe adopted advanced monitoring system to check welding quality and condition.Worker can check and operate all conditions from Computer screen,and work with motorized accurate adjusting,12 meter pipe welding machine finishes automatic inside longitudinal seam welding for small diameter pipe.It improve the working efficiency and welding quality.Its suitable for manufacturing small diameter pipe in batch![Longitudinal seam welding machine]( "Longitudinal seam welding machine")
Longitudinal seam welding machine1.1 Key-type pneumatic pressing device is applied to calmp the work piece. This device provides force evenly to work piece and prevents
deformation.
1.2 It is widely applied in high quality welding and low-deformation straight seam. Use in such fi eld: petrochemical industry, solar water
heater manufactor, pipeline and automobile industry.
1.3 Controlled by PLC, driven by DC motor, and stepless speed regulation, with control system to realize automatic welding,and equipped
with straight oscillator for optional choice.![H beam assembly machine]( "H beam assembly machine")
H beam assembly machine1.Introduction for H beam assembly machine:
1.1.The automatic centering of flange and web adopts hydraulic motor and gear, with high centering precision and good reactivity. All of the operation are centralized on the electric control button panel, with easy and convenient operation and precise positioning.H beam assembly machine
1.2.The main transmission part adopts cycloid pinwheel and Taiwan TAIAN brand inverter, the assembly speed can be adjusted between 0.5—6 M/min.H beam making machine![Standard gantry h beam welding machine]( "Standard gantry h beam welding machine")
Standard gantry h beam welding machine1.Introduction for H beam welding machine:
1.1.The H beam gantry gate welding machine has two structures: Gantry gate move type & double cantilever move type.H beam welding machine
1.2. Gantry gate or cantilever drive method: AC motor and R series worm reducer.Automatic H beam welding machine
1.3. Welding speed: 0.15~1.5m/min.H beam saw welding machine![T type gantry h beam welding machine]( "T type gantry h beam welding machine")
T type gantry h beam welding machine1.Introduction for H beam welding machine:
1.1.The H beam gantry gate welding machine has two structures: Gantry gate move type & double cantilever move type.H beam welding machine
1.2. Gantry gate or cantilever drive method: AC motor and R series worm reducer.Automatic H beam welding machine
1.3. Welding speed: 0.15~1.5m/min.H beam saw welding machine![HYJ-800 H beam straightening machine]( "HYJ-800 H beam straightening machine")
HYJ-800 H beam straightening machine1.Introduction for H beam straightening machine:
1.1.The mainframe is integral frame structure with stress relief, it is processed and shaped in one step by CNC floor type boring and milling machine,with the advantages of compact structure, strong strength and enough rigidity.H beam straightening machine
1.2.The material of upper roller is 35CrMo, the abrasion resistance has been improved after the process of heat treatment and grinding.Automatic H beam straightening machine
1.3.The material of main transmission roller is 40Cr with integral forging process, as well as high frequency quenching process and grinding on the surface, the precision and abrasion resistance has been improved a lot.H beam flange straightening machine
